The instrument panel in your Chevy Trailblazer is a vital instrument that gives the driver with key data equivalent to speed and fuel levels. In case your instrument panel stops working appropriately, you must restore the problem by eradicating the broken panel and changing it with a working one. You’ll be able to choose up the instruments and tools you’ll need for the job out of your native auto retailer.
Chevy TrailBlazer Repair the Instrument Panel Instructions
1. Pull the lever on the lower left-hand side of the driver’s side seat to pop the hood. Absolutely open up the hood and find the battery terminals. Take away the bolts from the terminals with a wrench. Elevate both the positive and negative cables off the battery terminals.
2. Press the tabs behind the steering wheel to change the location of your wheel. Move the steering wheel to the lowest possible place inside the steering column.
3. Take away the two screws that are connected to the rubber bezel with a screwdriver. Raise the bezel from round the panel.
4. Take away the three mounting screws which repair the instrument panel to the dashboard. Slide the panel out of the dash. Slide your hand round the rear of the panel and disconnect the electrical connector. This may will let you remove the panel fully from the car.
5. Follow the removal steps in reverse to insert a brand new instrument panel into the dash. As soon as the work is accomplished, reattach the battery cables to their respective terminals and activate the engine to verify that the instrument panel now works appropriately.
Read more : How to Repair the Instrument Panel in a Chevy TrailBlazer
